-
Breakthrough 3D printing method
According to foreign media Techspot, researchers at the Applied Photonic Device Laboratory (LAPD) of the Faculty of Engineering at the Federal Institute of Technology in Lausanne (EPFL) in Switzerland have developed a breakthrough 3D printing method that may disrupt the entire industry.
2021-11-25
-
Ultrasound can increase the strength of 3D printed metal by 12%
According to foreign media reports, thanks to a new study in Australia, the quality of 3D printed metal parts may soon be improved. Scientists there have determined that ultrasound can increase the strength of these materials by changing their microstructure.
2021-11-25
-
Why does shape memory alloy have memory?
There is another story about the discovery of the properties of SMA materials. Early research on this material began in the 1930s, when scientists studied some unexpected properties exhibited by different metals.
2021-11-25
-
Human body wearable air-conditioning equipment produces new results
Can you imagine this scene? When you go out in the hot summer, a wearable air conditioner will follow you at any time. It can not only monitor blood pressure, cardiac electrical activity and skin hydration level, but also cool you down to prevent heat stroke.
2021-11-25
-
3D printing private custom knee joint
On January 1, the "Regulations on the Supervision and Administration of Customized Medical Devices (Trial)" jointly issued by the State Food and Drug Administration and the National Health Commission was officially implemented, and my country's 3D printed medical devices will usher in vigorous development.
2021-11-25
-
New flame-retardant composite materials come out!
Epoxy resin (EP) is an important thermosetting material. Because of its excellent chemical resistance and stability, good optical transmittance and adhesion, it is widely used in adhesives, coatings and advanced nanocomposite materials.
2021-11-25
-
3D printing technology replicates the Damascus steel manufacturing process
Recently, according to foreign media reports, Damascus steel is hard and tough, mainly because it is composed of different alloy layers. In ancient times, this was the preferred material, especially the blade material.
2021-11-25
-
Significant progress has been made in the research of 3D printing dot matrix structure
Lightweight lattice structures have broad application prospects in the fields of load bearing, energy absorption, heat insulation, and shock isolation. The use of 3D printing to manufacture lattice structures has the characteristics of high efficiency and flexibility, and has also become an important application in the field of 3D printing.
2021-11-25
-
Highly functional graphene 3D printing material was born
Recently, a research team from Zhejiang University used the solvation effect of glycerol molecules on graphene oxide to design a graphene oxide/glycerin 3D printing ink. This research has opened up the scope of new three-dimensional graphene frame materials and laid the foundation for the application of graphene materials in the fields of energy storage, composite materials, catalysis and other fields.
2021-11-24
-
What are the commonly used materials for 3D printing?
ABS is currently the most widely used polymer. It combines various characteristics of PS, SAN, BS, and has the characteristics of hard, hard, and hard. abs is a terpolymer of acrylonitrile, butadiene and styrene. A represents acrylonitrile, B represents butadiene, and S represents styrene.
2021-11-24
-
New iron-based alloy materials
Japanese scientists are committed to extending the limit of superelastic materials and have made major breakthroughs. They showed a new iron-based alloy that can withstand extremely high and extremely low temperatures.
2021-11-24
-
Will the United States impose an additional 10% aluminum tariff on Canada affect international aluminum prices?
US President Trump signed an announcement on the 6th, announcing the resumption of 10% tariffs on some aluminum products imported from Canada.
2021-11-24
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
