-
What is dimensional chain
There are two characteristics of the dimensional chain: closedness-each size of the dimensional chain constitutes a closed system in a certain order; correlation-one of the size changes will affect other size changes.
2020-04-25
-
Skills Of Using U Drill On CNC Machine Tool
Compared with the integral drill, the U-drill is a tool that performs hole machining by combining a center blade (inner edge) and an outer periphery blade (outer edge). This structure determines that the U-drill has an irreplaceable advantage over other drilling tools.
2020-04-11
-
CNC Machine Coordinate System
In the process of writing a CNC machining program, in order to determine the relative position of the tool and the workpiece, the movement path of the tool must be described through the machine tool reference point and the coordinate system.
2020-04-11
-
Workpiece installation and its fixtures
Direct mounting method The workpiece is directly placed on the machine table or general fixture (such as standard accessories such as three-jaw chuck, four-jaw chuck, flat-nose pliers, electromagnetic chuck, etc.), and sometimes it is clamped without finding another correct
2020-04-11
-
The Skills List Of CNC Turning
The machining order of the parts: drilling first and then flat ends (this is to prevent shrinkage during drilling); roughing first, then finishing (this is to ensure the accuracy of the parts)
2020-04-11
-
Sharpening of drill bits
It is named after its spiral flute with a spiral shape resembling a twist. Spiral grooves have 2 grooves, 3 grooves or more grooves, but 2 grooves are the most common.
2020-04-18
-
CNC lathe soft claw correction
The purpose of the soft jaws is to finish machining in batches, and measures to improve the repeated positioning accuracy of the workpiece.
2020-04-11
-
How to cnc turning qualified metric triangular thread?
In most factories, one or more people are responsible for adjusting the machine, and then a special person is responsible for operating the machine.
2020-04-11
-
Market Prospects For Sheet Metal Machining
Sheet metal machining is a technology that performs various machining on metal plates, and changes the shape and performance of the original metal plates.
2020-03-14
-
How to deal with rust in sheet metal machining
Sheet metal machining includes traditional cutting and blanking, blanking, bending and forming methods and process parameters, as well as various cold stamping die structures and process parameterS.
2020-03-14
-
Factors Affecting the Machining Precision of CNC Lathes
Position error refers to the amount of variation or deviation of the mutual position between the actual surface, axis, or plane of symmetry of the part relative to its ideal position after machining, such as perpendicularity, position, and symmetry.
2020-03-21
-
Accuracy Analysis of slender bar-like cutters on CNC lathes
The improvement of the accuracy of rod-shaped tools has always been a difficult point in tool manufacturing.
2020-03-13
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
