-
Differences Between Wire EDM and Die-Sinking EDM
This article explores the fundamental differences between Wire EDM and Die-Sinking EDM, their respective advantages and disadvantages, and their applications in various industries.
2024-07-15
-
How much do you know about the six skills of the laser cutting machine in the actual cutting process?
During the cutting process of the laser cutting machine, the beam is focused by the lens of the cutting head into a small focal point, so that the focal point can reach a high power density, and the cutting head is fixed on the z axis. At this time, the heat input by the beam far exceeds the part of the heat reflected, conducted or diffused by the material, and the material is quickly heated to the melting and vaporization temperature.
2021-10-25
-
How Long Does Anodizing Last?
Anodizing is an electrochemical process used to increase the thickness of the natural oxide layer on the surface of metal parts, primarily aluminum.
2024-06-27
-
How to reduce the scrap rate of workpieces in deep cavity boring?
There are many reasons for the difficulty of boring. The key is that the following four points need to be paid attention to. In order to facilitate the correct analysis of the problem and avoid using the wrong processing method, it is recommended that you keep it in your mind and understand it.
2021-10-25
-
The Differences of CNC Machining Titanium and CNC Machining Steel
This article delves into the differences between CNC machining titanium and steel, covering aspects such as material properties, tool selection, machining strategies, and applications.
2024-06-17
-
What are the effects of the temperature environment of the machining workshop on the machining of long parts?
The weather in Dalton, Georgia is hot, and Tuftco Corp. produces carpet tufting machines there. These machines have long rows of needles for gluing the carpet thread to the common base, posing special challenges for processing. When the company needed a more precise machine tool capable of handling extremely long horizontal strokes, the XiMill machining center from Bertsche Engineering Corp. emerged as the solution. However, even with new machines, extreme environments and part temperatures require further changes to the process.
2021-10-25
-
The Types of Laser Cutting Gases in Sheet Metal Fabrication
This article explores the various types of laser cutting gases, their roles, and their applications in sheet metal fabrication.
2024-06-17
-
The Operating Procedures Of Punch Press
Punch is a very common equipment in our lives, it is also what we often call stamping press. For the punch press, it is usually divided into three parts: the punch die, the lower die and the knife wall. The die on the punch is the upper half of the entire die, which is also a die mounted on the slider of the press. The upper die seat is the uppermost plate-shaped part of the upper die.
2021-10-16
-
Cost-Effective Tolerance and Surface Finish Strategies in CNC Machining
Computer Numerical Control (CNC) machining is a versatile manufacturing process widely used across industries for its precision and efficiency in creating intricate parts and components from various materials.
2024-06-09
-
Introduction Guide To Operating CNC Lathes
In the process of CNC machining, the selection of tools is a very important link. Choosing the right tool can not only greatly improve the processing efficiency of the machine tool, but also improve the machining quality of the parts. Choosing the wrong tool will result in half the effort, or even scrap the parts
2021-10-23
-
Top 15 CNC Machined Components for Boats and Marine
This article delves into the top 15 CNC machined components critical to the functionality and performance of high-performance boats.
2024-06-25
-
The Principle Of Choosing Suitable Die Casting Machine
Die casting machine is a machine used for pressure casting. Including two kinds of hot press room and cold press room. Later, they are divided into two types: straight type and horizontal type. The die-casting machine hydraulically injects the molten metal into the mold under pressure to cool and form
2021-10-09
- 5 Axis Machining
- Cnc Milling
- Cnc Turning
- Machining Industries
- Machining Process
- Surface Treatment
- Metal Machining
- Plastic Machining
- Powder Metallurgy Mold
- Die Casting
- Parts Gallery
- Auto Metal Parts
- Machinery Parts
- LED Heatsink
- Building Parts
- Mobile Parts
- Medical Parts
- Electronic Parts
- Tailored Machining
- Bicycle Parts
- Aluminum Machining
- Titanium Machining
- Stainless Steel Machining
- Copper Machining
- Brass Machining
- Super Alloy Machining
- Peek Machining
- UHMW Machining
- Unilate Machining
- PA6 Machining
- PPS Machining
- Teflon Machining
- Inconel Machining
- Tool Steel Machining
- More Material
