INCONEL 625 Machinability | PTJ Shop

INCONEL 625 Machinability


INCONEL 625 Machinability

Nickel-based superalloy INCONEL 625 is currently an important high-temperature alloy material used in high-end applications such as aerospace, nuclear power, and military equipment. It is the most widely used metal material for the manufacture of aeroengine components, thermal equipment components, and nuclear power equipment components; Compared with alloys, nickel-based superalloys have better high-temperature resistance; the domestic nickel-based superalloy material system is close to that of the industrial powers such as the United States, Germany, and Japan. In terms of forging standards, manufacturing processes, heat treatment methods, and supply forms The top class is almost consistent. It's just that the imported steel mill INCONEL 625 materials have different advantages and slightly different compositions. Let PTJ give you an analysis one by one today.

INCONEL-625-Machinability -PTJ CNC MACHINING Shop
INCONEL 625 Machinability . -PTJ CNC MACHINING Shop

First of all, the following forging standards are used in the production of Inconel 625 alloy in major steel plants:

Inconel 625 bar:

ASTM B 446; ASME SB 446 (Rod & Bar),

AMS 5666 (Bar, Forgings, & Rings);

ISO 9723 (Rod & Bar),

VdTÜV 499 (Rod & Bar),

BS 3076NA21 (Rod & Bar),

EN 10095 (Rod, Bar, & Sections),

DIN 17752 (Rod & Bar),

ASME Code Case 1935 (Rod, Bar, & Forgings),

Inconel 625 wire:

DIN 17753 (Wire).

ISO 9724 (Wire)

AMS 5837 (Wire),

Inconel 625 Forgings:

ISO 9725 (Forgings),

ASTM B 564; ASME SB 564 (Forgings);

DIN 17754 (forgings),

Inconel 625 sheet:

ASTM B 443; ASTM SB 443 (Plate, Sheet & Strip),

AMS 5599; 5869; MAM 5599 (Plate, Sheet & Strip),

ISO 6208 (Plate, Sheet & Strip),

VdTÜV 499 (Plate, Sheet & Strip),

BS 3072NA21 (Plate & Sheet),

EN 10095 (Plate, Sheet & Strip),

DIN 17750 (Plate, Sheet & Strip),

ASME Code Case 1935.

Inconel 625 pipe:

ASTM B 444; ASTM B 829;

ASME SB444; ASME SB 829 (Seamless Pipe & Tube),

ASTM B704; ASTM B 751; ASME SB 704;

ASME SB 751 (Welded Tube),

ASTM B705; ASTM B 775; ASME SB 705;

ASME SB 775 (Welded Pipe),

ISO 6207 (Tube),

AMS 5581 (Seamless & Welded Tube),

VdTÜV 499 (Tube),

BS 3074NA21 (Seamless Pipe & Tube),

DIN 17751 (Tube),

ASME Code Case 1935.


Secondly, the microstructure of the nickel-based superalloy, that is, the nature, morphology, size, content and distribution of each constituent phase, especially the precipitated phase, determines its high temperature mechanical properties and operating life. However, the microstructure of the alloy is determined by its composition. Therefore, the source of determining alloy performance lies in the alloy component itself, that is, the type and content of each element constituting the alloy component. Let us look at the composition of INCONEL 625 alloy:
INCONEL 625 / UNS N06625 / DIN 2.4856
Sweden ◎ United States ◎ Germany ◎ Japan imported plate << bars << pipes << welding materials
● Inconel 625 chemical composition:
Alloy% Nickel Chromium Molybdenum Niobium Tantalum Iron Aluminum Titanium Carbon Manganese Silicon Copper Phosphorus Sulfur
625 min 58 20 8 3.15
 Maximum 23 10 4.15 5 0.4 0.4 0.1 0.5 0.5 0.5 0.015 0.015
● Inconel 625 physical properties:
Density 8.4 g / cm3
Melting point 1290-1350 ℃
● Inconel 625 The minimum mechanical properties of the alloy at room temperature:
Alloy and condition Tensile strength
Rm N / mm2 Yield strength
RP0.2N / mm2 elongation
A5% Brinell hardness
625 760 345 30 ≤220
This alloy has the following characteristics:
1. It has excellent corrosion resistance to various corrosive media in oxidizing and reducing environments
2. Excellent resistance to pitting and crevice corrosion, and will not produce stress corrosion cracking caused by chloride
3. Excellent corrosion resistance to inorganic acids, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid and mixed acids of sulfuric acid and hydrochloric acid, etc.
4. Excellent resistance to corrosion of various inorganic acid mixed solutions
5. When the temperature reaches 40 ℃, it can show good corrosion resistance in various concentrations of hydrochloric acid solution
6. Good workability and weldability, no cracking sensitivity after welding
7. Manufacture certification of pressure vessel with wall temperature between -196 ~ 450 ℃
8. Certified by the American Society of Corrosion Engineers NACE standard (MR-01-75) to meet the highest standard level VII for use in acid gas environments
● Inconel 625 metallographic structure:
625 is a face-centered cubic lattice structure. When kept at about 650 ℃ for a long enough time, carbon particles and unstable quaternary phase will be precipitated and converted into stable Ni3 (Nb, Ti) orthorhombic lattice phase. After solid solution strengthening, the molybdenum and niobium components in the nickel-chromium matrix will improve the mechanical properties of the material, but the plasticity will be reduced.
● Inconel 625 corrosion resistance:
Alloy 625 shows excellent corrosion resistance in many media. It has excellent resistance to pitting corrosion, crevice corrosion, intergranular corrosion and erosion in chloride media. It has good corrosion resistance to inorganic acids, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid, etc. At the same time, it has resistance to alkali and organic acid corrosion in oxidizing and reducing environments. Effective resistance to chloride ion-reducing stress corrosion cracking. There is almost no corrosion in seawater and industrial gas environments, and it has high corrosion resistance to seawater and salt solutions, even at high temperatures. No sensitivity during welding. It is resistant to carbonization and oxidation in static or circulating environments, and is resistant to corrosion by chlorine-containing gases.
● Inconel 625 application areas:
The softened and annealed low-carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength make it a thinner structural component. Alloy 625 can be used in applications that come into contact with seawater and withstand high mechanical stress. Typical application areas:
1. Components of chloride-containing organic chemical processes, especially where acid chloride catalysts are used
2. Digester and bleaching tank used in the manufacture of pulp and paper industry
3. Absorption tower, reheater, flue gas inlet baffle, fan (wet), agitator, deflector, and flue in the flue gas desulfurization system
4. Used to manufacture equipment and components used in acid gas environment
5. Acetic acid and acetic anhydride reaction generator
6. Sulfuric acid condenser
  It is found from INCONEL 625 that a higher content of easily oxidizable alloy elements such as chromium, molybdenum, cobalt, titanium and other strengthening elements are needed. These easily oxidizable element alloys and nickel metals themselves become important elements of harmful impurities in the alloy, especially sulfur and phosphorus Source, the content of harmful impurity elements S and P in nickel-based superalloys is required to be less than 0.010-0.020%.
  Furthermore, high-temperature alloy forming methods mainly include forging and casting. The process of casting uses the fluidity of the liquid superalloy to fill the mold cavity to form the desired product. Forging is a technological process in which a high-temperature alloy undergoes solid-state high-temperature thermoplastic deformation to fill the mold cavity, thereby forming the desired product. Both have advantages and disadvantages. Among them, casting is good at forming complex-shaped parts, and forging is based on improving product performance.
  Finally, let us look at the supply form of INCONEL 625 superalloy:
INCONEL 625 sheet specifications: 0.5-60MM
INCONEL 625 rod material Φ8-Φ200MM (black leather, light rod)
Can be supplied to the customer's length:
INCONEL 625 rolling rod ≤Φ45MM
INCONEL 625 forged rod Φ45MM-Φ200MM
INCONEL 625 stainless steel tube Φ830mm-2500mm, wall thickness 0.2-80mm
All products are supplied according to American ASTM / ASME, German DIN, Japanese JIS and other standards

cnc machining shopPTJ CNC shop produces parts with excellent mechanical properties, accuracy and repeatability from metal and plastic. 5 axis CNC milling available.Machining high-temperature alloy range inclouding inconel machining,monel machining,Geek Ascology machining,Carp 49 machining,Hastelloy machining,Nitronic-60 machining,Hymu 80 machining,Tool Steel machining,etc.,. Ideal for aerospace applications.CNC machining produces parts with excellent mechanical properties, accuracy and repeatability from metal and plastic. 3-axis & 5-axis CNC milling available.We will strategize with you to provide the most cost-effective services to help you reach your target,Welcome to Contact us ( [email protected] ) directly for your new project.
Case Studies

Reply Within 24 Hours

Hotline:+86-769-88033280 E-mail: [email protected]

Please place file(s) for transfer in the same folder and ZIP or RAR before attaching. Larger attachments can take a few minutes to transfer depending on your local internet speed :) For attachments over 20MB, click  WeTransfer and send to [email protected].

Once all fields are filled in you will be able to send your message/file :)