For CNC lathe machining parts, pay more attention to these details_PTJ Blog

CNC Machining Services china

For CNC lathe machining parts, pay more attention to these details


In fact, what a workpiece can see is not only the strength of a manufacturer, but also how it handles some details. For CNC lathe machining parts, if the manufacturer does not handle it well, then this machining part is not usable, so what should the manufacturer pay attention to when processing?

For CNC lathe machining parts, pay more attention to these details

1. The burr on the cost surface can be said to be easily overlooked by many manufacturers. Many people say what this part looks like when it comes out, and what it looks like when the finished product is packaged. In fact, for a part, the CNC lathe processing parts are completed by equipment, then the cloak will be produced during injection molding, and this burr is also produced at this time. If it is not trimmed in time, or the The parts are obsolete. Otherwise, it will affect other links during use.

2. The accuracy of parts. For CNC lathe machining parts, its accuracy is very strict. Only when the required accuracy is met can it be used. The accuracy of the parts is judged mainly by the size of the parts. Control ability, if the tolerance is within the specification that the tolerance can fluctuate, then the part is qualified, if it exceeds the tolerance, then it is unqualified.

3. Analysis of the test results. For a component, it is bound to go through a performance test before it leaves the factory. If the performance is qualified, it will be shipped. If it is not, then it should be analyzed. For some reasons, this can also avoid mass scrapping. Manufacturers in the processing industry will basically deal with it in this way. They will make a certain quality control chart based on the performance of many companies to analyze the reasons.

Link to this article: For CNC lathe machining parts, pay more attention to these details

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting:

cnc machining shopPTJ® is a customized manufacturer that provides a full range of copper bars, brass parts and copper parts. Common manufacturing processes include blanking, embossing, coppersmithing, wire edm services, etching, forming and bending, upsetting, hot forging and pressing, perforating and punching, thread rolling and knurling, shearing, multi spindle machining, extrusion and metal forging and stamping. Applications include bus bars, electrical conductors, coaxial cables, waveguides, transistor components, microwave tubes, blank mold tubes, and powder metallurgy extrusion tanks.
Tell us a little about your project’s budget and expected delivery time. We will strategize with you to provide the most cost-effective services to help you reach your target,You are welcome to contact us directly ( ) .

Reply Within 24 Hours

Hotline:+86-769-88033280 E-mail:

Please place file(s) for transfer in the same folder and ZIP or RAR before attaching. Larger attachments can take a few minutes to transfer depending on your local internet speed :) For attachments over 20MB, click  WeTransfer and send to

Once all fields are filled in you will be able to send your message/file :)